
|
TBHDR1 - High Dynamic Range Amplifier
he TBHDR1 is a high dynamic range amplifier
with a frequency range from 30kHz to 1.5GHz. Its gain is characterized up to
6GHz.
The TBHDR1 has a high IP3 and a low noise figure which makes it an ideal
alternative pre-amplifier for spectrum analyzers and receivers in EMC test
applications. Due to its low noise figure, high IP3 and gain down to the kHz
range it also performs very well as amplifier for active loop antennas. Specifications Maximum supply voltage: 5.5V
Maximum input power: +10 dBm
Input, Output: 50 Ohm, SMA female
Nominal supply Voltage: 5V, typ. 100mA, Mini-USB-B connector
1dB output compression point @ 100 MHz: +19.2 dBm typical
1dB output compression point @ 500 MHz: +19 dBm typical
1dB output compression point @ 1000 MHz: +18.3 dBm typical
3rd order output intercept point @ 100 MHz: +38dBm
3rd order output intercept point @ 500 MHz: +37dBm
3rd order output intercept point @ 1000 MHz: +33dBm
Reverse isolation S12: -28dB
Input matching: 30kHz-1.5GHz < - 16 dB
Output matching: 30kHz-1.5GHz < - 10 dB
Noise Figure: 2.7 dB Gain:
30 kHz
|
150 kHz
|
1 MHz
|
100 MHz
|
500 MHz
|
1 GHz
|
1.5 GHz
|
3 GHz
|
6 GHz
|
17.2 dB
|
23.6 dB
|
24.2 dB
|
24 dB
|
22.9 dB
|
21.1 dB
|
19.5 dB
|
14.1 dB
|
5.3 dB
|
APPLICATION:
- general purpose gain block
- pre-amplifier in applications with low noise and high IP3
requirements
- pre-amplifier for spectrum analyzers, especially in EMC
pre-compliance test applications
- Loop antenna amplifier
|
|
 Updating...
Ċ Jason Lin, 2019年5月16日 凌晨4:16
|