Tekbox TBOH01 LISN

Tekbox TBOH01 UH LINE IMPEDANCE STABILISATION NETWORK LISN - CISPR 25

Tekbox TBOH01 LISN OVERVIEW

The Tekbox TBOH01 5µH LISN is a device required to setup conducted noise measurements of DC-powered devices. It is designed to be used for EMC pre-testing in the frequency range of 150kHz to 110 MHz.

The LISN is inserted into the supply line of the DUT (Device Under Test). Conducted noise which is present at the supply terminals of the DUT can be measured at the BNC connector using a spectrum analyzer or a measurement receiver. The source (supply) terminal and the DUT terminal are decoupled by a 5µH inductor.

Tekbox TBOH01 SPECIFICATIONS

Frequency range: 100kHz – 110MHz (1GHz, see figure 4 in the manual)

DC Resistance: 60 mΩ

Maximum current: 10A

Maximum source voltage: 200V