Alarm Mode:
It is possible to set an alarm threshold at a given
level of electrical or magnetic fields, beyond which
the device will beep. This alarm mode can remain
active even with the device in standby mode
(display off), allowing greater autonomy. It is thus
possible to detect levels of field emitted
intermittently, or by leaving the device at a given
location, to test different configurations or to enable
different devices to determine those likely to
generate fields above a threshold.
The LFM1010 can have an autonomy of 1000h in
standby mode with alarm mode active.
Switchable filter:
A low pass filter cutoff frequency of 1 kHz can be
activated to limit the scope of exploration at very low
frequencies (eg mains network) and not be
disturbed by the signals at higher frequencies
generated by switching power supplies and energy
saving bulbs for example.
Dosimeter mode:
This method integrates the measurements over a
prolonged period, even with the device in standby
mode, to determine the amount of electric and
magnetic radiation received by unit (and thus by the
wearer) over the same period in his daily trip.