SYM6025 RF Synthesizer

SYM6025 RF Synthesizer module is a very wide-band / low noise new generation RF synthesizer, providing many unprecedented features in its volume and price range. Offering as standard fast serial USB hi-speed interface, it allows very easy integration. The module takes its single voltage power supply from the USB connector. On / off pulse modulation is also available as standard, allowing fast signals through very short rise and fall times (typ. 25ns). Powered by a powerful ARM7 32 bits micro-controller, it reacts fast to control commands and can also work without an host thanks to an internal EEPROM memory and the possibility to store a number of discrete frequencies that can be programmed with a precise timing. Output level can be set in the -40 to +10 dBm with 1 dB steps. SYM6025 RF Synthesizer module will ideally come as a replacement for laboratory synthesizers to integrate in production test benches, in multi-carriers test equipment, or as local oscillator sources. Provided with Windows® 7/XP control software, it can also be used as an auxiliary RF signal generator in laboratory.

25 MHz to 6000 MHz, 1 kHz frequency step.
USB interface as standard with USB mini-B connector.
Output level range +10 to -40 dBm, 1 dB steps.
2 power measurement inputs (10MHz to 6 GHz, dynamic range 60 dB)
Phase noise: <-105 dBc at 100kHz offset from carrier at 2GHz
Frequency stability: +/- 0,5 ppm with internal reference. (+/-2,5ppm on temperature range)
Harmonics : < -30 dBc (>100MHz), Non harmonics : < -70 dBc
Single voltage supply : 5 V dc, 250 mA through USB)
External reference input, programmable frequency.
Switching time: < 1 ms
Temperature range: -40 .. +85°C
Configuration memories: 100
Dimensions : 135(L) x 69(l) x 28(h) mm
Weight: 150 g.

(1041k)

Jason Lin,

2017年5月12日上午2:28

Comments