|
TSP-X Scanner
TSP-X Scanner is an integrated platform based on all-standard scanner and analysis software. It is used for automatically sweeping and scanning signals at high speed, such as GSM, CDMA2000/EVDO, TD-SCDMA, WCDMA, FDD/TD-LTE signals, NB-IoT, eMTC and 5G (CW test). The output results include cell coverage parameters, broadcast channel system messages and spectrum displayed intuitively by various means. The instrument can be widely applied in network survey, planning, building, optimization, etc.
TSP-X Scanner
• Support full band tests within 2MHz to 3GHz.
• Support CW test for 5G (3.3GHz to 3.6GHz, 4.8GHz to 5GHz)
• Support simultaneous tests of multi-system and multi- frequency GSM, CDMA/EVDO, TD-SCDMA, WCDMA, TDD-LTE, FDD-LTE, NB-IoT, eMTC, 5G (CW test) signals.
LTE test: reports RSSI, RP, RQ, Timing, Cell ID and other parameters. The instrument supports MIMO, time slot, RB measurement.
WCDMA test: supports multi-frequency simultaneous test and report of Peak Ec/Io, Peak Ec and Aggregate Ec/Io Pilot Delay, Delay Spread, SIR, etc.
GSM test: supports CCH testing and reporting of cell BCCH, BSIC, RxLev, C/I, etc.
• The scanning speed is adjustable to adapt to various applications, such as high-speed railway, highway, ordinary road and indoor tests.
• LTE Top N Scan Dynamic Range: 25dB.
• Support high-speed SIB decoding where decoding success rate is more than 90% if CINR is more than 0.
• Support automatic testing without PC. Test states can be remotely monitored, and data can be automatically transmitted back to the server with built-in 8GB memory.
TSP-X Scanner
Performance
|
NB-IoT
|
Supported band
Data node
Measurement rate
Sensitivity(RSRP)
Common-frequency cell test capability
Dynamic range (CINR) @20MHz: P-SCH/S-SCH
Dynamic range (CINR) @20MHz: RS
IoT deployment support
Cell switch
|
800MHz, 900MHz, 1800MHz, 2100MHz
RSSI, RS, RQ, CINR, Timing, Cell ID, Cyclic Prefix, CFO, Delay Spread
≤1s per single frequency point
-135dBm (RSRP@20MHz)
> 25dB
-20dB to +40 dB
-23dB to +40 dB
Standalone operation, in-band operation, guard band operation
Support real time switch
|
eMTC
|
Data node
Measurement rate
Sensitivity(RSRP)
Common-frequency cell test capability
Dynamic range (CINR) @20MHz: P-SCH/S-SCH
Dynamic range (CINR) @20MHz: RS
Cell switch
|
RSSI, RS, RQ, CINR, Timing, Cell ID, Cyclic Prefix, CFO, Delay Spread
≤1s per single frequency point
-135dBm (RSRP@20MHz)
> 25dB
-20dB to +40 dB
-23dB to +40 dB
Support real time switch
|
FDD/TD-LTE
|
Measurement mode
|
P-SCH/S-SCH, RS, and RB
|
Data mode
|
RSSI, RS, RQ, CINR, Timing, Cell ID, Cyclic Prefix, CFO, Delay Spread,
|
Channel bandwidth
|
1.4 / 3 / 5 / 10 / 15 / 20 MHz
|
Antenna skills
|
SISO, MISO, MIMO (4×2)
|
Measurement rate @20MHz
|
>40channel/sec
|
SIB decoding success rate
|
90% @ CINR > 0 dB
|
Common-frequency cell test capability
|
>25 dB
|
Dynamic range (CINR) @20MHz: P-SCH/S-SCH
|
-20dB to +40 dB
|
Dynamic range (CINR) @20MHz: RS
|
-23 to +40 dB
|
Test sensitivity: RS RP
|
-135dBm (RSRP @20MHz)
|
UMTS [ WCDMA/HSPA(+)]
|
Measurement mode
|
Top N Pilot
|
Data mode
|
lo, Ec/Io, Aggregate Ec/Io, SIR, Rake Finger Count, Time Off- set, Delay Spread
|
Channel bandwidth
|
200kHz / 3.84MHz
|
Measurement rate
|
20 channel/sec
|
SIB decoding rate
|
200ms/Single Cell
|
CPICH dynamic test range (Ec/Io)
|
-21dB
|
Sensitivity
|
-110dBm
|
GSM
|
Measurement mode
|
Color Code
|
Data mode
|
BSIC, C/I, RSSI
|
Channel bandwidth
|
30kHz / 200kHz
|
Measurement rate
|
≥80Channel Decodes/sec
|
SIB decoding rate
|
20s / 95 Carriers; 30s / 125 Carriers
|
Dynamic range
|
+2dB C/I @90% BSIC Detection
|
Sensitivity
|
-114dBm
|
CDMA
|
Measurement mode
|
Top N PN
|
Data mode
|
Ec, lo, Ec/Io, Aggregate Ec/Io, Pilot Delay, Delay Spread
|
Channel bandwidth
|
30kHz / 1.25MHz
|
Measurement rate
|
70 channel/sec
|
Dynamic range
|
-7dB to -25dB
|
Sensitivity
|
-114dB
|
TD-SCDMA
|
Measurement mode
|
Top N DWPTS、PCCPCH
|
Data mode
|
Channel, Midamble Code, Sync-DL, RSCP, C/I, SIR, ISCP, Ec/ Io, RSSI,
|
Channel bandwidth
|
200kHz / 1.28MHz
|
Measurement rate
|
30 channel/sec
|
SIB decoding rate
|
4s / 9 Carriers
|
Dynamic range
|
-15dB
|
Sensitivity
|
-110dBm
|
Power measurement
|
CW measurement
|
Measurement rate
|
>800 Channel/sec
|
Spectrum measurement
|
Measuring range
|
>90dB
|
Measurement rate
|
>3G/sec
|
RF Features
|
Internal spurious response
|
-114dBm
|
Operation level
|
-15dBm Max
|
Safety input level
|
≤ 10 dBm
|
Frequency accuracy
|
± 0.05 ppm (GPS Locked ); ± 0.1 ppm (GPS Unlocked)
|
Physical
|
Maximum power (+8 to +16 VDC)
|
24W
|
RF operating range: In-Band
|
-15dBm Max
|
Temperature range
|
Operating: 0°C ~ + 50°C; Storage: – 40°C ~ + 85°C
|
Host data communications interface
|
LAN
|
RF input
|
RF: SMA Female (50OHm); GPS: Male (50OHm) SMB
|
Weight & size
|
2.5kg, 120*100*220mm
|
|
|