ACM2509

CMT PLANAR ACM8000T







  ACM2509 Automatic Calibration Kit


ACM2509 is an Automatic Calibration Module (ACM) designed for full one-port and two-port calibrations of vector network analyzers from Copper Mountain Technologies. It operates in the frequency range from 20 kHz to 9 GHz. 
For lower frequencies, the ACM2509 operates up to 9 GHz.

ACM2509 calibrates any CMT VNA in fully automatic mode through the built-in functions of the analyzer software. ACM2509 switches to the impedance states one by one in the process of calibration. The VNA calibration coefficients are calculated using the measured S-parameters of the ACM impedance states and the data stored in the ACM2509 memory.

Advantages of Automatic Calibration 
The ACM2509 calibration offers the following advantages over traditional mechanical SOLT calibration:

  • Reduced number of connections (for example, full two-port calibration requires only one connection of the ACM to a VNA instead of 7 connections of mechanical standards)
  • Faster calibration procedure
  • Reduced risk of human error
  • Higher accuracy
  • Reduced wear on test port connectors 

    The ACM2509 contains two RF connectors for connection to VNA test ports, Mini-USB control port, several different transmission and reflection impedance states and electronic changeover switches. ACM2509 has six reflection states (three for each port) and a Thru, and ACM2509 has ten reflection states (five for each port) and a Thru. The precise S-parameters of the calibration impedance states are stored in the ACM2509  memory (factory characterization data). 
  • Basic configuration options for ACM2509  are below. For more information on ACM2509  configurations and specifications, please see the data sheet at right. 

  • ACM2509  (20 kHz to 9 GHz):
  • N-Type M-F
  • N-Type F-F
  • 3.5mm M-F
  • 3.5mm F-F 
    Because the ACM2509  comes in multiple configurations and connectors, we advise you to talk to us to see which one is best for your application.

  • Support Vector Network Analyzers
  • COBALT C1209
  • COBALT C1220
  • 804/1
  • 304/1
  • 808/1
  • R140
  • R54
  • R60
  • S5048
  • S5065
  • S5085
  • S7530
  • TR5048
  • TR7530
  • TR1300/1

  •             CMT PLANAR ACM  ACM2509  文件下載    



       

    Comments