ACM2520

CMT PLANAR ACM8000T





 ACM2520 Automatic Calibration Kit


ACM2520 is an Automatic Calibration Module (ACM) designed for full one-port and two-port calibrations of vector network analyzers from Copper Mountain Technologies. It operates in the frequency range from 100 kHz to 20 GHz. 
For lower frequencies, the ACM2520 operates up to 20 GHz.

ACM2520 calibrates any CMT VNA in fully automatic mode through the built-in functions of the analyzer software. ACM2520 switches to the impedance states one by one in the process of calibration. The VNA calibration coefficients are calculated using the measured S-parameters of the ACM impedance states and the data stored in the ACM2520 memory.

Advantages of Automatic Calibration 
The ACM2520 calibration offers the following advantages over traditional mechanical SOLT calibration:

  • Reduced number of connections (for example, full two-port calibration requires only one connection of the ACM to a VNA instead of 7 connections of mechanical standards)
  • Faster calibration procedure
  • Reduced risk of human error
  • Higher accuracy
  • Reduced wear on test port connectors 

    The ACM2520 contains two RF connectors for connection to VNA test ports, Mini-USB control port, several different transmission and reflection impedance states and electronic changeover switches. ACM2520 has six reflection states (three for each port) and a Thru, and ACM2520 has ten reflection states (five for each port) and a Thru. The precise S-parameters of the calibration impedance states are stored in the ACM2520  memory (factory characterization data). 
  • Basic configuration options for ACM2520  are below. For more information on ACM2520  configurations and specifications, please see the data sheet at right. 

  • ACM2520  (100 kHz to 20 GHz):
  • N-Type M-F
  • N-Type F-F
  • 3.5mm M-F
  • 3.5mm F-F 
    Because the ACM2520  comes in multiple configurations and connectors, we advise you to talk to us to see which one is best for your application.

  • Support Vector Network Analyzers
  • 808/1
  • COBALT C1209
  • COBALT C1220
  • 804/1
  • 304/1
  • R140
  • R54
  • R60
  • S5048
  • S5065
  • S5085
  • S7530
  • TR5048
  • TR7530
  • TR1300/1

  •             CMT PLANAR ACM  ACM2520  文件下載    



       

    Comments