ACM8000T

CMT PLANAR ACM8000T




ACM8000T Automatic Calibration Kit


ACM8000T is an Automatic Calibration Module (ACM) designed for full one-port and two-port calibrations of vector network analyzers from Copper Mountain Technologies. It operates in the frequency range from 300 kHz to 8 GHz. 
For lower frequencies, the ACM8000T operates up to 8 GHz.

ACM8000T calibrates any CMT VNA in fully automatic mode through the built-in functions of the analyzer software. ACM8000T switches to the impedance states one by one in the process of calibration. The VNA calibration coefficients are calculated using the measured S-parameters of the ACM impedance states and the data stored in the ACM8000T memory.

Advantages of Automatic Calibration 
The ACM8000T  calibration offers the following advantages over traditional mechanical SOLT calibration:

  • Reduced number of connections (for example, full two-port calibration requires only one connection of the ACM to a VNA instead of 7 connections of mechanical standards)
  • Faster calibration procedure
  • Reduced risk of human error
  • Higher accuracy
  • Reduced wear on test port connectors 

    The 
  • ACM8000T contains two RF connectors for connection to VNA test ports, Mini-USB control port, several different transmission and reflection impedance states and electronic changeover switches. ACM8000T has six reflection states (three for each port) and a Thru, and ACM8000T has ten reflection states (five for each port) and a Thru. The precise S-parameters of the calibration impedance states are stored in the ACM8000T memory (factory characterization data). 

    Basic configuration options for ACM8000T are below. For more information on ACM8000T configurations and specifications, please see the data sheet at right. 

  • ACM8000T (300 kHz to 8 GHz):
  • N-Type M-F
  • N-Type F-F
  • 3.5mm M-F
  • 3.5mm F-F 
    Because the ACM8000T comes in multiple configurations and connectors, we advise you to talk to us to see which one is best for your application.

  • Support Vector Network Analyzers
  • 808/1
  • 804/1
  • 304/1
  • R140
  • R54
  • S5048
  • S7530
  • TR5048
  • TR7530
  • TR1300/1

  •             CMT PLANAR ACM  ACM8000T 文件下載    



       


    Ċ
    Jason Lin,
    2014年8月15日 下午6:08
    Comments