TBL5063-3 50uH Line Impedance Stabilisation Network LISN

The TBL5063-3 is a Line Impedance Stabilization Network for the measurement of conducted emissions within the range of 9 kHz to 30MHz, according to the CISPR 16-1-2 standard. The device is designed for testing 3-phase, AC-powered equipment with supply voltages up to maximum 690V/400V and 63A. Conducted noise can be measured on each phase and on the neutral conductor. The TBL5063-3 has separate RF outputs for each phase and neutral and consequently can be coupled with the TBLM 2 LISN Mate to split the emissions in its common mode and differential mode components . The TBL5063-3 has no integrated high pass filter at the RF outputs, but comes with an external 9 kHz coaxial high pass instead. The LISN is equipped with 63A CEE sockets.

Frequency range: 9 kHz to 30 MHz
Impedance: 50 Ω ║ (50 µH + 5 Ω)
Artificial hand: 220 pF + 511 Ω
Switchable PE: 50 Ω ║ 50 µH
250µH pre-filter
Separate RF outputs for each line and neutral
Air core inductors
Line voltage: max 690V/400V / 50 – 60 Hz
Max. current per line and neutral: 63A @ 23°C each
3-phase EUT socket: CEE / IEC60309, 3L+N+PE, 63A, female
Power connector: CEE / IEC60309, 3L+N+PE, 63A, male
Measurement connectors: 50 Ω BNC
External 9 kHz high pass filter, N-male / N-female
Operating Temperature Range: +5 °C … + 40 °C; 5% to 80% RH

Available accessories

TBPC- IEC60309-63-3m 3-phase mains power cable, 63A, 3m length, CEE / IEC60309, 3L+N+PE, 63A, male, CEE / IEC60309, 3L+N+PE, 63A, female
TBPC- IEC60309-63-5m 3-phase mains power cable, 63A, 5m length, CEE / IEC60309, 3L+N+PE, 63A, male, CEE / IEC60309, 3L+N+PE, 63A, female
TBPC- IEC60309-63-10m 3-phase mains power cable, 63A, 10m length, CEE / IEC60309, 3L+N+PE, 63A, male, CEE / IEC60309, 3L+N+PE, 63A, female
TBCON-CEE-M-63 CEE / IEC60309-63, 3L+N+PE, 63A, male cable connector
TBCON-CEE-F-63 CEE / IEC60309-63, 3L+N+PE, 63A, female cable connector
TBLA-3P-63A Coaxial calibration adapter set

回列表頁

加入購物車成功！