TBLM2 LISN MATE

The TBLM2 is is a Common Mode / Differential Mode – separator companion device for LISN. The LISN Mate is connected to the output of a LISN inserted into the positive supply line and to a second LISN inserted into the negative supply line. The conducted noise signal at the output of a LISN is the sum of common mode and differential mode noise. The LISN mate separates it into the common mode and differential mode components, with each signal component available at a separate BNC port. The TBLM2 can be used in the frequency range from 9 kHz to 110 MHz.The TBLM2 is is a Common Mode / Differential Mode – separator companion device for LISN. The LISN Mate is connected to the output of a LISN inserted into the positive supply line and to a second LISN inserted into the negative supply line. The conducted noise signal at the output of a LISN is the sum of common mode and differential mode noise. The LISN mate separates it into the common mode and differential mode components, with each signal component available at a separate BNC port. The TBLM2 can be used in the frequency range from 9 kHz to 110 MHz.

Compliance: ISO 11452-4; IEC / EN 61000-4-6 insertion loss specification for BCI clamps above 250 kHz
Characterized frequency range: 10 kHz to 500 MHz
Insertion loss: 5 dB typ.; 50 Ohm system (100 Ohm loop impedance)
Transfer impedance: 29 dB Ohm typ.; 50 Ohm system (100 Ohm loop impedance)
Power rating: capable of injecting severity levels I, II, III, IV according to ISO 11452 and customer specified level V up to 350 mA
Max. core temperature: 80 °C
Connector type: N female
Aperture diameter: 27 mm
Outside diameter: 92 mm
Height: 76 mm
Weight: 1.2 kg

回列表頁

加入購物車成功！