1. Home
  2. PRODUCTS產品介紹
商品編號：CMT-FET-WR10-HP
FET-WR10-HP 75-110 GHz 高功率毫米波頻率擴充系統

CobaltFx cost-effective millimeter wave frequency extension system allows you to build a scalable and affordable testing solution.

  • Frequency Range: 75-110 GHz
  • Connector Type: Waveguide WR10
  • High-power (HP) extender module provides increased test port output power : +13 dBm
  • Attenuator option is available for adjustable output power control: 0-30 dB
  • Each frequency extender module includes a Proxi-Flange™

Recommended VNAs:

Total cost of the system depends on selected VNA. The extenders are packaged in small and versatile enclosures that allow for flexible port arrangements. Waveguide ports are manufactured in accordance to the new IEEE 1785-2a standard and ensure industry best alignment and repeatability of connection, allowing for long interval times between calibration.

規格
頻率: 75 GHz - 110 GHz | 輸出功率: +13 dBm (HP) | 波導介面: WR10 | 搭配 A2202-Fx 主機 | 支援毫米波全 S 參數量測。

Frequency range75 GHz to 110 GHz
Test port output power (no attenuation)+13 dBm, typ
Test port input power (damage)+30 dBm, max
Output power control range (for configurations
with attenuator)		30 dB, typ
Dynamic range²100 dB, 120 dB typ
Test port match25 dB, typ
Directivity35 dB, typ
RF source input frequency6.25 GHz to 9.17 GHz
RF source input power-6 dBm, min; -3 dBm,
typ; 0 dBm, max
LO source input frequency (RF+IF)6.25 GHz to 9.17 GHz
LO source input power-3 dBm, min; 0 dBm,
typ; +3 dBm, max
IF frequency range10 MHz to 1000 MHz
Multiplication factor12
Magnitude stability3+0.1 dB, typ
Phase stability3+2.5°, typ
Specification temperature+20°C to +30°C
Operating temperature0°C to +50°C

Datasheets

CobaltFx Data Sheet  |  CobaltFx Assembly Guide

加入購物車成功！